Skip to Content

Water Softener & Iron Remover Waterboss ProPlus 380

The WaterBoss ProPlus 380 is a high-capacity cabinet water softener and filtration system featuring an intuitive two-button controller. Specifically engineered to handle more severe water quality challenges in larger households, this unit features a built-in self-cleaning sediment filter that eliminates the need for manual filter replacements. It delivers a continuous supply of clean, soft water with maximum efficiency and minimal maintenance required.

Owner's Manual and Installation Guide Models Pro 180, ProPlus 380

1,033.06 € 1,033.06 € (Tax included)
1,033.06 € (Tax included)

  • Brand

Internal Reference: 250055
Barcode: 1872025005501

This high-efficiency water treatment system combines multiple purification stages into a single space-saving unit. The built-in mechanical filter automatically traps and removes sand, rust, silt, and sediment, self-cleaning during each regeneration cycle. Water then passes through an expanded bed of high-grade fine-mesh ion-exchange resin, which effectively reduces extreme water hardness and removes up to 10 mg/L of dissolved ferrous iron. This dual-action process prevents heavy limescale buildup, protects household appliances, and eliminates red iron stains.

The system is managed by an intelligent electronic controller with a 2-button display that monitors usage and automatically initiates demand-based regeneration. The entire eco-friendly regeneration process is completed in just 25.4 to 29.7 minutes, consuming between 96 and 112 liters of water and 2.7 to 4.5 kg of salt depending on the capacity setting. Featuring a larger cabinet layout with an expanded integrated brine tank and a safe 12V low-voltage power supply, the unit provides high flow rates and fits easily into tight spaces, utility rooms, or basements.

Technical Specifications:

  • Maximum Compensated Hardness: 1,710 mg/L
  • Maximum Ferrous Iron Reduction: 10 mg/L
  • Minimum pH Level: 7
  • Flow Rate: 1.8 m³/h (Peak 31 L/min)
  • Pressure Drop at Service Flow Rate: 1.0 bar at 31 L/min
  • Regeneration Time: 25.4 to 29.7 minutes
  • Water Consumption Per Regeneration: 96.0 to 112.0 L
  • Salt Consumption Per Regeneration: 2.7 to 4.5 kg
  • Ion-Exchange Resin Volume: 35 L
  • Operating Water Temperature: 4°C–49°C
  • Operating Water Pressure: 1.4–8.3 bar
  • Controller Type: 2 Button LCD (Demand-initiated regeneration)
  • Salt Storage Capacity: 78 kg
  • Plumbing Connections: 1" Male NPT
  • Dimensions (Height x Footprint): 84.8 cm H x 42 x 51 cm
  • Shipping Weight: Approx. 61 kg
  • Electrical Rating: 12 VAC, 50/60 Hz, 0.015 kW-hr

Please note: To select the correct water treatment equipment for your specific needs, a professional water analysis and specialist consultation are highly recommended.

Specifications

Text

Brand Waterboss