Skip to Content

Water Softener & Iron Remover WaterBoss 700

The WaterBoss 700 is an all-in-one cabinet water softener and iron filter designed to effectively resolve major well and municipal water issues. This compact system features a built-in, self-cleaning sediment filter that eliminates the need for manual filter replacements. Exceptionally salt and water-efficient, it delivers continuous soft, iron-free water while requiring minimal maintenance.

Owner's Manual and Installation Guide Models 700, 900, 950

764.46 € 764.46 € (Tax included)
764.46 € (Tax included)

  • Brand

Internal Reference: 412450
Barcode: 725296930007

This high-efficiency water treatment system combines multiple purification stages into a single space-saving unit. The built-in Power Clean™ mechanical filter automatically traps and removes sand, rust, silt, and sediment down to 20 microns, self-cleaning during each regeneration cycle. Water then passes through the Supersaver™ fine-mesh ion-exchange resin, which effectively reduces water hardness and removes up to 10 ppm of dissolved ferrous iron. This dual-action process prevents limescale buildup, protects household appliances, and eliminates red iron stains.

The system is managed by an intelligent electronic controller with a 4-button display that monitors usage and automatically initiates demand-based regeneration. The entire eco-friendly regeneration process is completed in just 18.5 minutes, consuming only 14.5 gallons (approx. 55 liters) of water and 1.0 lb (0.5 kg) of salt on its low-setting up to 28.6 gallons (108.3 L) and 12 lbs (5.4 kg) at maximum capacity. Featuring a compact cabinet layout with an integrated brine tank and a safe 12V low-voltage power supply, the unit provides high flow rates and fits easily into tight spaces, utility rooms, or basements.

Technical Specifications:

  • Maximum Compensated Hardness: 1,200 mg/L
  • Maximum Ferrous Iron Reduction: 10 mg/L
  • Minimum pH Level : 7
  • Regeneration Time: 18.5 to 41:00 minutes
  • Water Consumption Per Regeneration: 54.8 to 108.3 L
  • Salt Consumption Per Regeneration: 0.5 to 5.4 kg
  • Ion-Exchange Resin Volume: 20 L
  • Operating Water Temperature: 4°C–49°C
  • Operating Water Pressure: 1.4–5.5 bar
  • Flow Rate:  1.8 m³/h (Peak 30 L/min)
  • Pressure Drop at Service Flow Rate: 1.0 bar at 30 L/min
  • Controller Type: 4 Button Icon (Demand-initiated regeneration)
  • Salt Storage Capacity: 54 kg
  • Plumbing Connections: 1" Male NPT
  • Dimensions (Height x Footprint): 65 cm H x 38 x 48 cm
  • Shipping Weight: Approx. 39 kg
  • Electrical Rating: 12 VAC, 50/60 Hz, 0.015 kW-hr

Please note: To select the correct water treatment equipment for your specific needs, a professional water analysis and specialist consultation are highly recommended.


Specifications

Text

Brand Waterboss